【 Weak current College 】 on home theater wiring tips

In recent years, home theater became one of the theatre development, more and more home theater enthusiasts will movie moved to home.
Cable home theater system plays an irreplaceable role of the hub, cabled, the DVD player will image signal transmission system to the TV, receiver, the audio signal is transferred to the microphone. To a home theater room equipment complete arrangement, not only requires a significant amount of cable, you also need considerable patience. In today's home theater room, the vast majority of cement, cable from one end to connect to the other end of the degree of difficulty is significantly increased. Here, we will share some experience home theater wiring as well as some solutions to common problems.

Question 1: in the cement floor cabling
Abroad, some family house with basement, in the House of home theater wiring implementation is very easy to install, simply place the cables installed in the floor below, connected to the microphone, system components and display devices. But in our country, most of the houses do not have such a condition, the basement of the House are made from mixed soil material, to cable penetration room requires room to play the hole, this implementation seems too much trouble, and House beautiful also greatly reduced.

Solution:
1, if the user would the cables installed in the carpet and the floor below, you can play on the floor, the cables along the pipeline implantation, so that the cable is adequately protected.
2, in the cement floor holes, cables hidden in accordance with the path on to cables in method decorated very nice, but the overall appearance of the room will have a larger impact on the overall comparison of complex engineering projects. If users feel that engineering is too troublesome, you can select flat cable, the cable is very thin, thick, like paper, if installed in the floor and the thickness of the floor, its basically negligible, the user is not easy to detect, but in this way there is a flaw, the wiring is routed over the floor cannot be placed too heavy furniture.
3. the floor cabling is the most common way, through wall wiring also is a good choice. Cable can be installed on the wall, rear seat, etc.

Problem 2: not enough space on the ceiling
Abroad, many family house has a mezzanine, this is the ideal location of the wiring in the home theater projector and have been used for scrolling the screen, the role of the attic is more pronounced. Using attic layout home theater for two of the main advantages: the environment is very beautiful, user can set the projector and screen, and other devices all placed in the attic, if the user is not opened by remote control button, others are simply not aware of this room, there are so many messy equipment. In addition, you can support and mobile screens, Projector Accessories completely hidden, so that room and bedroom, home theater, offices and other multi-functional role. If the home theater on the ceiling of less space to place important system components of the space will certainly more tense, but this is not to say that a user cannot use these parts placed on the ceiling, we can try to solve the problem.

Solution:
1, increase the ceiling floor: even if there is no space on the ceiling, the user can still automatically projector and screen is hidden in special ceiling and floor. Ceiling floor mainly for supporting and hidden home theater system for large machines, but also according to the needs of users in the room to add some structure.
2, installation on the wall: screen and projector slowly falling from the ceiling to home theater enthusiastically, these devices installed on the wall is equally viable method. For example, a flat panel television installed in front of the wall, covered with gauze curtains, and then install the one next to the TV-start unit to gauze curtains in the device, along with open or closed, giving viewers a cinema-like realism. The other side of the room, the projector setup behind a wall or hidden inside the coffee table.
Speaker is mounted on the side: If the ceiling is not enough room to install style speaker is unlikely, in this case, the user can select the in-wall speakers embedded. If the user wishes to speakers not too prominent, you can use the entire walls covered with a sound structure Panel, make the room look quite beautiful. We can also use a more simple way, the speakers are color matching with walls painted colors.

Question 3: the sound quality is poor
Room shape and size on the speakers sound has a direct impact. For example, in a square room, Sonic is passed to the direction of the wall of the time, it is easy to achieve brilliance, also to avoid the repetition of sounds. In the live show, we often hear the voice of the low frequency band, but often these sounds do not have reached their desired depth and loudness for many specific sound lack a sense of space.

Solution:
1. change the room space or rearranging furniture location on the room's overall sound effect experience can bring great improvements. For example, users can install the front room or behind a virtual wall, the depth of change in the room, if you need to adjust the side wall, you can increase sound Panel, move a certain distance. At the same time, we also can take full advantage of the room and other facilities, such as a bookcase and other decorations.
2. sometimes, room many humble device to improve the quality of the sound has a big role, such as room closet, sloping ceiling or release of wall, etc. Therefore, when you install a home theater system, it is best to consult the following installation, seeking the best layout suggestion, try not to ignore some small details that often the small details on the impact of the sound quality is judged.