【 Weak current College 】 civil construction energy conservation management provisions

Description: residential building energy management provides that its purpose is to strengthen civil building energy management, energy efficiency, indoor thermal environment. 　　Keywords: buildings, energy-saving in order to strengthen the civil building energy management, energy efficiency, indoor thermal environment and energy conservation under the People's Republic of China law, building law and People's Republic of China concerning the administrative regulations, the enactment of this provision. 　　II where it should be the adoption of civil construction and energy-saving design standards (existing building) and the tourist hotel in heat and air conditioning energy saving design standards of construction and its ancillary equipment, the construction of the project's approval, the design, construction, engineering quality supervision and acceptance and property management, application of this provision. 　　Article 3, the construction of the State administrative departments in charge of the national civil construction supervision and management of energy saving. The local people's Governments at or above the county level construction administration departments in charge of the administrative region civil construction supervision and management of energy saving. 　　The daily work of building energy saving can be commissioned the construction of administrative departments of the institutions responsible for building energy efficiency. 　　The State shall encourage energy conservation technological progress, encourage the introduction of foreign advanced technology, energy-saving building prohibits the introduction of foreign backward building technologies, materials and equipment. 　　The State encourages the development of these energy saving technology (product): (a) new energy-saving wall and roof insulation, heat insulation technology; (2) energy-saving window insulation and sealing technologies; (3) central heating and heating and power, co-generation power technology; (4) heating system temperature control and heat thermal measurement technology; (5) solar, geothermal and other renewable energy application technologies; (vi) architectural lighting energy-saving technologies; (7) air conditioning energy saving technologies; (VIII) other technologies mature and effective energy-saving technology and energy management technology. 　　5 new residential buildings of centralized heating system should use the double-pipe system, the implementation of the temperature adjustment and household heat metering unit, heating charge. 6 new civil construction project feasibility study report or design, shall include the topic of rational use of energy. Approval of the authorities to the law in accordance with relevant State regulations, on project feasibility study report or design organization demonstration and evaluation. 　　Does not meet the standard of the project, shall not approve construction. 7 construction unit should be in accordance with approved project feasibility study report, or the design of energy-saving requirements commissioned the design of the project. 　　Energy-saving construction unit did not entrust the design of the required correction, and a 10 million Yuan fine of 30 million Yuan. 　　　Article 8 should be based on architectural design company entrusted with the building and energy efficiency standards and specifications for design (hereinafter referred to as energy-saving design) to ensure the quality of the building energy-saving design. (A) freezing and centralized heating in cold region setting of the new, expanded design of residential architecture, you must perform the People's Republic of China civil construction industry standards for the energy-saving design standards (existing building). 　　　Temporary unconditional settings set heating of residential buildings and use functions and similar to civil construction, the envelope must be performed according to the above standards. 　　　(2) a new, expanded and reconstructed by the tourist hotel's thermal design with air conditioning, you must follow the tourist hotel in People's Republic of China heat and air conditioning energy saving design standards ". (3) new, expanded and reconstructed in the other categories of civil construction and its subsidiary facilities and its matching lines, the design of piping and equipment shall meet the relevant heat, air conditioning, ventilation, heat insulation, lighting, daylighting, and other design standards and specifications relating to energy conservation requirements. Architectural design unit by energy saving standards and specifications for design, it shall modify the design. 　　Has not been modified, shall issue a warning, and more than $ 20 million the following fines; losses shall compensate the loss; two years, a total of three works by energy saving standards and specification design, you can order the rectification, the lower the quality grading of registered practitioners, may place stop personal practice a year. 　　9 construction administration departments or its delegate design review units, construction drawing design review, you should review the contents of the energy-saving design and signed. 　　Engaged in building energy-saving design review work of designers, should accept the energy-saving standards and energy-saving technology training. 　　Article 10 States and provinces, autonomous regions and municipalities directly under the central building administration departments in charge of organization establishment complies with the requirements of the building energy-saving standards for building universal design or standard Atlas. 　　Article 11-saving construction units should follow to ensure that the design and construction engineering construction quality. 　　Energy efficiency design for failure to carry out construction of the correction; improvement of the cost of the project, the construction unit; can give warning, the circumstances are serious and may also be ordered to pay more than $ 30 million fine and two years, three projects are not consistent with the requirements of energy-saving design standards for the construction of the design, you can order the rectification, the lower the quality grading. 　　Article 12 of the local people's Governments at or above the county level construction administration departments or its delegate project quality supervision bodies, on the energy-saving design standard requirements of the project, in the General Administration of quality supervision, should be annotated in the file. 13 heating units, housing, property units or its delegate property management unit shall improve buildings heating system for energy management, establish and improve the energy efficiency assessment system. Carefully recorded and reported to the energy consumption data for detection of the boiler operation. 　　On more than energy consumption indicators or the heating temperature standards, by the local people's Governments at or above the county level construction administration departments ordered its deadline compliance. Article 14 the national building energy-saving product certification and the Elimination System. 　　Specific measures for the management of State-building administration departments with the departments concerned. Article 15 of the local people's Governments at or above the county level construction administration departments should strengthen the infrastructure, technical upgrading and other collegeFunding arrangements for energy saving in the supervision and management of funds, earmarked. 　　Article 16 of the present regulations shall be ordered for rectifications, lower the quality grading of administrative punishment, by issuing certificates of authorities. 　　17 provinces, autonomous regions and municipalities directly under the central building administration departments to establish the detailed rules for the implementation of the provisions. 　　18 non-Frost and cold regions should reference the relevant standard-setting in the area of civil building energy-saving design standards or regulations, is responsible for organization of building energy-saving engineering demonstration and promotion. 　　Article 19 of this regulation by the State administrative departments in charge of the construction. Article 20 this Regulation as from 1 January 2000.