【 Weak current College 】 smart home design strategy (2)

Domestically, the national living standards substantially improved, upscale Villa sales increasingly huge increase. The Villa has an area of 300 square meters or more in General, decoration and more luxury, lamp types eyesight, and power is doubled (200W, 400W, 800W ... ）。
X10 power line products have been in development for years, with high-power electrical, lamps are widely used, to the manufacturers of a problem, it is difficult to break. Now we Sobolev products, high power matching of lamps and how to use the products following X10 introduced:

1, high-power LED lamps
The lamps in General in the Villa's living room or dining room, for example: Louisa was always connected lamps slot. This lamp can use fluorescent lights or electrical switches. Example: type: 2224, 2225, etc.
Implementation methods are as follows:
1) for a single channel of the following fluorescent 800W can use fluorescent lights or electrical switch (product number: 2224, 2225, etc.), its single power maximum has been reached 800W.
2) for a single use 1000W bulbs above tap method.
There are two types of connection: left: module switch method; right side: scene switch method. Connection method:

2 or more electrical module (model: 2257) module switch (models such as: 2261 and 2262, etc.). Selection of modules from power, maximum power of single 2257 is the 800W.

3) for the fluorescent lamp 2000W-2500W, can directly plug in using o-free (model: 2027) with scene controller (model: 4206) use, it is more convenient for wiring.

Note: the free insertion of addresses set into scene controller, so you can control the lights.
2, high power incandescent lamp
The lamps in General in the Villa's living room or dining room, generally like some Crystal lamp, light source with incandescent lamps, dimming. But for single 400W below incandescent lamps can choose Sobolev incandescent lamp switch (models such as: 2220, 2221, dimmable incandescent switch).

But generally in the living room or dining room chandelier in the single power is very large, generally more than 500W or 1000W above say it is impossible to achieve so much power. You can also use tap method.
There are two types of connection: module switch method wiring diagram as follows:

Scene switch method connection: Please refer to figure a in the scene switches Add method.

Choice of 2 or more incandescent lamp module (model: 2255) module switch use. Selection of modules from power, maximum power of single 2255 is 400W.
To sum up, for high-power lamps achieve is varied, mainly in the grasp of the above methods, capable of flexible application in practice.
Note: in the tap method address settings, together with several modules must be set to the same address.