【 Weak current College 】 countries accepted the special equipment manufacturing license program

2. the specific procedures for the special equipment manufacturing license including applications, receive, carry out type testing (if necessary), identification, assessment, approval, licensing, and so on, as follows: ① apply required manufacturing license applications for the manufacturing unit basic necessary conditions, fill in the application, the application may be downloaded from the site. ② provincial safety supervision Organization signed on provincial safety supervision organization sign in application. ③ submit application materials and its application to the applicant company related information, the Office reported to the State license. License Office on the completeness of the materials, conduct an initial review. Text, verbal request change; the lack of appropriate materials, such as the verbal notification may be added, you can supplement the oral request, you must request in writing. ④ acceptance (or rejection) of the boiler, review, agree to accept the signature of the application form, and cover boiler juzhang, transmit to the Office by the license applicant. Do not agree to accept the application for units to be issued by the special equipment manufacturing license notice is not accepted. ⑤ for type testing according to the rules require the type test, the applicant should conduct type test. ⑥ produce type test report bear type test units, after completing the type test shall produce type test report. ⑦ asked appraisal agencies to apply for units should be asked for identification of accrediting bodies field of appraisal. ⑧ submit identification assessment report identification of accrediting bodies in complete on-site field identification of assessment, the assessment report and issued identification type test report directly to the Office, if the application license units may consider necessary, or by the Office of the applicant to permit. ⑨ promulgating licensing (or notice to produce not license) boiler Bureau as a result of its review, eligible to the Office by the license applicant sent to the special equipment manufacturing license (in duplicate); do not meet the conditions, not to the special equipment manufacturing license notice. 3. time 3.1 provincial safety supervision organization should accept an application signed views within 5 days. 3.2 license Office received the application and related information, should be 15 business days will sign the application for return application views. 3.3 appraisal work should generally be in 6 months. Identification of accrediting bodies in the complete identification of accreditation shall be issued within 15 days of the appraisal report. 3.4 license Office upon receipt of identification of the assessment report, the Bureau should be in the boiler within 30 working days to complete the review, approval, and by the Office to apply for the license units for licensing or not accepted, and with a note of the special equipment manufacturing license work questionnaire ". 4. the complaint of the applicant conducting 4.1 reception, appraisal, etc, that there is a problem, have the right to stop work on reception, appraisal, if the problem is the case, the applicant can request to receive, review again. 4.2 units to apply for a notice of receipt is not admissible, not license notice, appraisal reports, some of the issues that need instructions, receiving the notice, appraisal report within 30 days after the AQSIQ. 4.3 on license in question, the applicant can reflect directly to AQSIQ.